Fri. Jan 27th, 2023

How to Clean Power Steering Fluid

Power steering fluid is an essential part of an automobiles steering system. It helps to ensure smooth operation of the cars steering wheel, and a well-maintained fluid level is important for keeping the power-assisted steering system functioning properly and avoiding expensive repairs. Unfortunately, over time, the fluid can become contaminated with dirt, grime, and other particles, leading to clogs and other issues. Thankfully, it is easy to clean power steering fluid with a few simple steps.

This guide will walk you through the process of cleaning your power steering fluid in order to ensure it is free of any contaminants, and that your steering system is operating at its best.

Step 1: Identify the Power Steering Fluid Reservoir

The power steering fluid reservoir is located either under the hood of your vehicle or in the engine compartment. It is generally a plastic container that is labeled power steering fluid or power steering reservoir. If you cannot locate the reservoir, consult your vehicles owners manual for its exact location.

Step 2: Check the Power Steering Fluid Level

Once you have located the power steering fluid reservoir, check the fluid level. If the level is low, top up the reservoir with the correct type of power steering fluid. If the fluid is discolored or has a burnt smell, then it is time to flush and replace the fluid.

Step 3: Drain the Old Power Steering Fluid

To drain the old power steering fluid, locate the drain plug at the bottom of the reservoir and remove it. Then, use a turkey baster or pump to draw out the old fluid, and discard it in a container. If necessary, use a rag to soak up any remaining fluid.

Step 4: Refill the Reservoir

Once the old fluid has been removed, refill the reservoir with fresh power steering fluid. Start with a small amount and add more as needed. Be sure to check the fluid level regularly to ensure it is at the correct level.

Step 5: Start the Vehicle and Check for Leaks

Once the reservoir is filled, start the vehicle and check for any leaks. If any leaks are present, repair them before continuing.

Step 6: Repeat the Flushing Process

Once the vehicle is running and there are no leaks, repeat the flushing process two more times. After each flush, check the fluid level and top it up as necessary. This will help to ensure that all of the old fluid is removed and replaced with fresh fluid.

Step 7: Check the Power Steering Fluid Regularly

Once the flushing process is complete, it is important to check the power steering fluid regularly. This will help to make sure that the fluid is always at the correct level and is free of any contaminants.

Cleaning power steering fluid is an essential part of maintaining your vehicles steering system. By following these steps, you can ensure that the fluid is free of any contaminants and is operating at its best. Doing so will help to avoid costly repairs, and keep your steering system running smoothly

By admin